4 April 2017
At Hannover Messe in hall 2, stand A08, the institute is presenting a system for cutting sheet piling in port areas. Also, the LZH is showing how natural resources on the seabed can be detected in the future. With various additive manufacturing processes the LZH can produce individual structures out of plastic or metal, from the macro to the nano scale. At Hannover Messe, the LZH is showing different components made using deposition welding, selective laser melting, stereolithography and nozzle-based processes, as well as two-photon-polymerization. Experts on-site will be advising which process is best for individual solutions.
Lightweight components
Carbon fiber reinforced plastics (CFRP) and aluminum are being used more and more in the automotive and shipbuilding sectors. The LZH is developing new concepts for processing and repairing CFRP, as well as for joining aluminum and steel. At the fair, the LZH is presenting automated processes for three-dimensional CFRP workpieces. Also, steel-aluminum welding will be shown, which can be used in shipbuilding for joining superstructures to the hull.
With smart components with integrated sensors, it is possible to monitor, control and optimize processing. This can be done by using lasers to directly “write” sensors on component surfaces. Thus, stress and vibrations can be measured accurately online. At the Hannover Messe, the LZH is presenting a strain sensor and a laser coded shaft.
Background
Developing and integrating future-oriented, laser-based processes in cooperation with companies – that is what the Laser Zentrum Hannover e.V. stands for. From April 24th to 28th, the research institute is presenting efficient, individual, lightweight and smart solutions at the Hannover Messe 2017. The Laser Zentrum Hannover e.V. will be exhibiting under the main topic “Integrating Light – Your Partner LZH” at the pavilion of State of Lower Saxony in hall 2, stand A08.
Efficient use under water
Working under water is both time-consuming and personnel-intensive, and especially difficult in the deep sea. The Laser Zentrum Hannover e.V. (LZH) is thus working on automated, laser-based systems for efficient use under water.
 Photo: LZHEfficient cutting under water with laser-based processes developed by the Laser Zentrum Hannover e.V. (LZH) |
Lightweight components
Carbon fiber reinforced plastics (CFRP) and aluminum are being used more and more in the automotive and shipbuilding sectors. The LZH is developing new concepts for processing and repairing CFRP, as well as for joining aluminum and steel. At the fair, the LZH is presenting automated processes for three-dimensional CFRP workpieces. Also, steel-aluminum welding will be shown, which can be used in shipbuilding for joining superstructures to the hull.
With smart components with integrated sensors, it is possible to monitor, control and optimize processing. This can be done by using lasers to directly “write” sensors on component surfaces. Thus, stress and vibrations can be measured accurately online. At the Hannover Messe, the LZH is presenting a strain sensor and a laser coded shaft.
Background
Developing and integrating future-oriented, laser-based processes in cooperation with companies – that is what the Laser Zentrum Hannover e.V. stands for. From April 24th to 28th, the research institute is presenting efficient, individual, lightweight and smart solutions at the Hannover Messe 2017. The Laser Zentrum Hannover e.V. will be exhibiting under the main topic “Integrating Light – Your Partner LZH” at the pavilion of State of Lower Saxony in hall 2, stand A08.
More news about "Hannover Messe":
1 April 2019
Hannover Messe: The next generation of autonomous space robots
Today, robots in space are mostly either passive observers or controlled by humans from Earth. Soon they will have to operate independently and over long periods of time under extreme conditions. In order to meet the high demands on the systems, the Robotics Innovation Center of the German Research Center for Artificial Intelligence (DFKI, Hall 2, booth C59) is developing new concepts. (more…)7 January 2019
Hannover Messe to focus on lightweight solutions
Hannover Messe 2019 will be taking a very close and comprehensive look at what lightweight has to offer industrial manufacturing and other disciplines and why it is such a key technology for the future. The industry trade fair returns on 1-5 April, 2018. (more…)24 October 2018
Hannover Messe USA: Record breaking show
Hannover Messe USA 2018, the first staging of the iconic Hannover Messe brand outside of Germany, presented game-changing Industry 4.0 solutions over six days during its co-location with IMTS 2018 at McCormick Place in Chicago from September 10-15. (more…)19 March 2018
Hannover Messe: Decentralized energy supply
A quick glance at the presentation program for the "Decentralized Energy Supply & Building Energy Technologies" forum in Hall 27 at the upcoming Hannover Messe reveals that the challenges along the way to achieving integrated energy are truly immense. (more…)22 January 2018
Concentrated robotics power at HANNOVER MESSE
The exhibitor list for HANNOVER MESSE 2018 reads like a Who's Who of the robotics industry. Robotics companies, systems integrators and providers of gripper systems will be showcasing their Smart Factory solutions. (more…)
| FAIR NAVIGATOR METALS / TOOLS | |
|---|---|
|
| E-PAPER HANNOVER MESSE |
 |