19 May 2019 
 
12 April 2019

More efficient measurement tech at Control 2019

Control - the world’s leading trade fair for quality assurance (7-10 May, 2019 in Stuttgart) presents digitised systems for real-time visualisation of measurement data and other functions, by means of which production can be made even more efficient.

Photo: P. E. Schall GmbH & Co. KGPhoto: P. E. Schall GmbH & Co. KG
Control – the world’s leading trade fair for quality assurance will take place on 7-10 May, 2019 in Stuttgart.
Good times for quality production: modern measuring technology is delivering more and more precise measurement data, which is being read out and interpreted automatically to a greater extent than ever before. Suitable equipment, sound advice and intelligent software for these and all other QA requirements will be exhibited at the Control international trade fair for quality assurance in Stuttgart from the 7th through the 10th of May.

“Customers from the manufacturing industries not only expect accurate and reliable measurement data, but rather real-time visualisation of the data as well to an ever greater degree,” explains Professor Alexander Reiterer, department head at the Fraunhofer Institute for Physical Metrology IPM, and adds: “Application-specific, visualised data are like a tool with which all states can be reliably evaluated and processes can be intuitively controlled,” because without these measurement data – acquired by modern sensor and measuring technology and evaluated in just fractions of a second by intelligent software – quality assurance is not possible in real-time. “We observe that tolerances and structures are being checked more and more frequently within the manufacturing process. This trend is even apparent for 100% inspection,” reports Fabian Krüger, Control project manager.

Suitable interfaces, technologies and methods are required in order to display measurement data at mobile devices such as tablets and VR goggles. A software platform with components for interactive interpretation and visualisation of measurement data should also be available. Industrial image processing, one of the main focal points of the world’s leading trade fair for quality assurance, plays an important role in this respect. Current research is also focusing attention on data reduction, in particular with regard to the visualisation of so-called point clouds which are generated during measurement and data recording with laser scanners. Enormous amounts of data must be reduced to volumes which can be quickly processed.

https://www.control-messe.de/en/

 

More news about "Control":


9 April 2019

New method uses ultraviolet light to control particle motion

A new, simple, and inexpensive method that uses ultraviolet light to control particle motion and assembly within liquids could improve drug delivery, chemical sensors, and fluid pumps. The method encourages particles to gather and organize at a specific location within a liquid and, if desired, to move to new locations. (more…)


27 February 2019

Quality assurance: Control to return in May 2019

From optical measuring technology with augmented reality features and 100 percent monitoring of collaborative systems, right on up to the latest computer tomographs and tactile sensors, and above all industrial image processing – on 7-9 May, 2019, the trade fair Control exhibits everything the users need. (more…)


28 November 2018

Testing and Control with more than 11,300 visitors

The 15th International Exhibition of Testing and Measuring Equipment Testing & Control was held in Moscow on 23 to 25 October 2018. According to the organizer the fair was a success. It counted 11,353 visitors. (more…)


20 June 2018

The smarter E Europe: Inverters control heating and stabilise grids

Inverters have become all-rounders, used not just for converting direct current into alternating current but for analyzing and controlling PV installations as well as solar batteries, power-to-heat and smart home solutions. Industry professionals can learn more about the trends shaping this future-oriented market at Intersolar Europe. (more…)


6 April 2018

Control to present Quality Assurance per I 4.0 Standard

The control will portray the world of quality assurance in hardware and software at the Stuttgart Exhibition Centre from the 24th through the 27th of April, 2018. According to the organizer, QA has blossomed into a key digital task. (more…)


29 March 2018

Industrial Image Processing at Control 2018

Image Processing, visual diagnostics and analysis tools are in great demand. That will also be demonstrated at the Control - international trade fair for Measuring Technology and Quality Assurance - at the Stuttgart Exhibition Centre from the April 24 to 27. (more…)


15 May 2019

New foldable drone flies through narrow holes

Research teams from University of Zurich and EPFL in Lausanne have developed a new drone that can retract its propeller arms in flight and make itself small to fit through narrow gaps and holes. This is useful when searching for victims of natural disasters. Inspired by birds that fold their wings in mid-air to cross narrow passages, it can even hold and transport objects along the way. (more…)


5 April 2019

bauma 2019 focuses on digital solutions

Digitalization is the main topic for bauma 2019. The construction machinery industry has set its sights on unlocking the possibilities of digitalization and standardizing digital solutions. Visitors can learn how far along the industry is at bauma from April 8 to 14, 2019, at the Munich trade fair site. (more…)


3 April 2019

European Conference with two special events

UFI is pleased to announce that two special events will take place ahead of this year’s European Conference in Birmingham (UK). The first will focus on “Operations and Services” while the second will be all about “Digital Innovation”. (more…)

 

FAIR NAVIGATOR
MEASURING TECHNOLOGY
21/05/2019 - 23/05/2019 in Hannover
LABVOLUTION
25/06/2019 - 27/06/2019 in Nürnberg
SENSOR+TEST
The Measurement Fair
09/07/2019 - 11/07/2019 in Johannesburg
analytica Lab Africa
International Trade Fair for Laboratory Technology, Analysis, Biotechnology and Diagnostics
02/09/2019 - 04/09/2019 in Shanghai
SENSOR CHINA Expo & Conference
The grand sensor event in Asia
24/09/2019 - 26/09/2019 in São Paulo
analitica LATIN AMERICA
International exhibition of technology for laboratories, analysis, biotechnology and quality control
25/09/2019 - 25/09/2019 in Münster
LAB-SUPPLY Münster
The regional trade fair for instrumental analytics, laboratory technology, laboratory chemicals and biotechnology/life science
MORE EVENTS

SAVE THE DATE
Next date of the fair Control: 05/05/2020 - 08/05/2020

NEWSLETTER
Stay up-to-date: Subscribe to our exclusive newsletter "Measuring technology" and keep an eye on international trade fair business - free of charge, once per month.
Your email address:
 
© 2018 by Connex AG