Thursday, 14. December 2017
  • In 2018, analytica will celebrate its 50th anniversary. Since 1968 it has been accompanying the development of chemical analytics and bioanalytics. The next analytica will take place from April 10th to 13th, 2018, on the fairgrounds of Messe München.

    Analytica with anniversary edition

    Analytica 2018
    © Messe München

    In 2018, analytica will celebrate its 50th anniversary. Since 1968 it has been accompanying the development of chemical analytics and bioanalytics. The next analytica will take place from April 10th to 13th, 2018, on the fairgrounds of Messe München.   more...

  • Photonics West 2018 will run 27 January through 1 February at the Moscone Center, in San Francisco, California, and is expected to draw 20,000 researchers, technology developers, and buyers to the international conference and exhibition on photonics.

    Trends at the SPIE Photonics West

    SPIE Photonics West 2018: Light innovations
    © SuRom / pixelio.de

    Photonics West 2018 will run 27 January through 1 February at the Moscone Center, in San Francisco, California, and is expected to draw 20,000 researchers, technology developers, and buyers to the international conference and exhibition on photonics.   more...

  • productronica, which was staged at the Munich trade fair site from November 14 to 17, 2017, counted 1,200 exhibitors from 42 countries that presented innovations from the fields of electronics production and development.

    productronica to continue to grow

    productronica 2018
    © Messe München

    productronica, which was staged at the Munich trade fair site from November 14 to 17, 2017, counted 1,200 exhibitors from 42 countries that presented innovations from the fields of electronics production and development.   more...

  • The future course of treatment with orthopaedic interventions is set afresh every two years at OTWorld in Leipzig. The next edition is held on 15 to 18 May, 2018. More than 21,000 experts from the various disciplines and professions are expected there.

    OTWorld 2018: Technology in orthopaedic treatment

    OTWorld 2018
    © Leipziger Messe / Tom Schulze

    The future course of treatment with orthopaedic interventions is set afresh every two years at OTWorld in Leipzig. The next edition is held on 15 to 18 May, 2018. More than 21,000 experts from the various disciplines and professions are expected there.   more...

  • The fair organizer UBM pushes its strategy to establish Medtec Europe as one preeminent, stand alone, European-focused, medical technology platform by deciding to integrate Medtec Ireland and Medtec Europe.

    Organizer to focus on Medtec Europe for 2018

    Medtec Europe 2018
    © Messe Stuttgart

    The fair organizer UBM pushes its strategy to establish Medtec Europe as one preeminent, stand alone, European-focused, medical technology platform by deciding to integrate Medtec Ireland and Medtec Europe.   more...

  • Increased government regulations, rising consumer demand and personalized care are among the top reasons for growth in the pharmaceutical and medical device industry. The PACK EXPO East (April 16 to 18, 2018 in Philadelphia, USA) will reflect that.

    Trends in the medical device industry

    PACK EXPO East 2018
    © Detlev Müller / pixelio.de

    Increased government regulations, rising consumer demand and personalized care are among the top reasons for growth in the pharmaceutical and medical device industry. The PACK EXPO East (April 16 to 18, 2018 in Philadelphia, USA) will reflect that.   more...

  • The embedded world exhibition & conference 2018 (27 February to 1 March 2018 in Nuremberg) is coming along very well, while the prospects for the embedded world and electronic displays conferences are also excellent.

    High-calibre expertise for the embedded community

    In Nuremberg, even the sausages are "embedded".
    © NürnbergMesse / Frank Boxler

    The embedded world exhibition & conference 2018 (27 February to 1 March 2018 in Nuremberg) is coming along very well, while the prospects for the embedded world and electronic displays conferences are also excellent.   more...

  • PCIM Europe 2018, the leading exhibition for power electronics and its applications, will once again be hosting an e-mobility special exhibition area, set to be larger than last year. The fair is scheduled from 05 to 07 June 2018 in Nuremberg.

    PCIM Europe 2018 features extended e-mobility area

    At PCIM Europe, visitors will have the opportunity to dive deep into the innovations presented, talk to experts in the field and discover the latest trends in the area of power electronics.
    © Mesago / Thomas Geiger

    PCIM Europe 2018, the leading exhibition for power electronics and its applications, will once again be hosting an e-mobility special exhibition area, set to be larger than last year. The fair is scheduled from 05 to 07 June 2018 in Nuremberg.   more...

  • The Consumer Technology Association (CTA) announced that the United States Department of Commerce (USDOC) has granted Trade Fair Certification for CES Asia 2018. Owned by CTA and co-produced by Shanghai Intex, CES Asia 2018 will run from 13 to 15 June in Shanghai.

    US Department of Commerce to endorse CES Asia 2018

    3D printing featured at CES Asia 2017
    © Consumer Technology Association (CTA)

    The Consumer Technology Association (CTA) announced that the United States Department of Commerce (USDOC) has granted Trade Fair Certification for CES Asia 2018. Owned by CTA and co-produced by Shanghai Intex, CES Asia 2018 will run from 13 to 15 June in Shanghai.   more...

  • At Metav 2018, the Quality Area will be showcasing the very latest applications for classical measuring and testing technology, up-to-the-future solutions in quality management, and innovations for quality assurance in Industry 4.0. The array of exhibits will be complemented by a forum featuring specialised presentations and seminars.

    Metav: Quality Area with measuring and testing technology

    At Metav's Quality Area, the exhibitors will be showcasing latest applications for measuring and testing technology.
    © Messe Düsseldorf / ctillmann

    At Metav 2018, the Quality Area will be showcasing the very latest applications for classical measuring and testing technology, up-to-the-future solutions in quality management, and innovations for quality assurance in Industry 4.0. The array of exhibits will be complemented by a forum featuring specialised presentations and seminars.   more...

  • MACH 2018 takes place at the NEC in Birmingham from 9th-13th April and is on course to be another bumper show, organizer MTA (Manufacturing Technologies Association) reports. With a new show layout, MACH 2018 will take place on the atrium side of the NEC, in Halls 17, 18, 19, 20, 6 and 7.

    MACH exhibition returns with a new show layout

    At the National Exhibition Centre (NEC) in Birmingham, MACH 2018 takes place from 9th-13th April.
    © By N-allen, CC BY-SA 4.0

    MACH 2018 takes place at the NEC in Birmingham from 9th-13th April and is on course to be another bumper show, organizer MTA (Manufacturing Technologies Association) reports. With a new show layout, MACH 2018 will take place on the atrium side of the NEC, in Halls 17, 18, 19, 20, 6 and 7.   more...

  • This year's formnext exhibition and conference drew a total of 21,492 attendees, representing an increase of over 60 per cent. A total of 470 exhibitors from 33 countries showed off an array of compelling innovations from various areas along the process chain of cutting-edge industrial manufacturing.

    formnext: 60 per cent more attendees

    At formnext in Frankfurt, a total of 470 exhibitors from 33 countries showed off an array of compelling innovations.
    © Mesago/Thomas Klerx

    This year's formnext exhibition and conference drew a total of 21,492 attendees, representing an increase of over 60 per cent. A total of 470 exhibitors from 33 countries showed off an array of compelling innovations from various areas along the process chain of cutting-edge industrial manufacturing.   more...

  • The innovative power of the solar industry, as well as endeavors to advance the energy transition, are clearly unabated. This is also reflected by the interest shown in Intersolar Europe 2018, the world’s leading exhibition for the solar industry.

    Intersolar Europe 2018: Becoming part of "The smarter E"

    Intersolar Europe exhibition takes place in Munich from June 20-22, 2018 and the conference will be June 19–20
    © Solar Promotion GmbH

    The innovative power of the solar industry, as well as endeavors to advance the energy transition, are clearly unabated. This is also reflected by the interest shown in Intersolar Europe 2018, the world’s leading exhibition for the solar industry.   more...

  • Deutsche Messe is expanding its offering of energy-themed shows in North America with the inclusion of an "Industrial Energy Systems" display at its Hannover Messe USA tradeshow, which premieres from 10 to 15 September 2018.

    New: Industrial Energy Systems at Hannover Messe USA

    HANNOVER MESSE USA  will be America’s leading trade show for Industrial Technology
    © Deutsche Messe

    Deutsche Messe is expanding its offering of energy-themed shows in North America with the inclusion of an "Industrial Energy Systems" display at its Hannover Messe USA tradeshow, which premieres from 10 to 15 September 2018.   more...

  • Addressing the now and future, UBM Asia will in 2018 organise the combined event - Electric & Power Vietnam and Renewable Energy & Energy Efficiency Vietnam. Held separately previously, the now combined event strives to facilitate a more efficient industry platform.

    Electric & Power Vietnam: Ready for a big energy transition

    Electric & Power Vietnam takes place in Ho Chi Minh, formerly knows as Saigon
    © Diego Delso/Wikipedia CC BY-SA 3.0

    Addressing the now and future, UBM Asia will in 2018 organise the combined event - Electric & Power Vietnam and Renewable Energy & Energy Efficiency Vietnam. Held separately previously, the now combined event strives to facilitate a more efficient industry platform.   more...

  • At EuroCIS 2018 in Düsseldorf the exhibitors will put digitally based in-store analytics in focus. Those analytics can provide retailers with valuable control and comparative data. The data required is furnished by modern IP cameras and smart evaluation programs.

    EuroCIS to present electronics for shopper behaviour

    EuroCIS to present electronics for shopper behaviour
    © Messe Düsseldorf / ctillmann

    At EuroCIS 2018 in Düsseldorf the exhibitors will put digitally based in-store analytics in focus. Those analytics can provide retailers with valuable control and comparative data. The data required is furnished by modern IP cameras and smart evaluation programs.   more...

  • "Connected Supply Chain Solutions" is the keynote theme of the CeMAT 2018 from 23 to 27 April in Hannover. The motto represents the interplay between Logistics 4.0 and Industry 4.0 as well as the digital integration and networking of value-adding and supply chains.

    Digital integration at CeMAT 2018

    Digital integration at CeMAT 2018
    © Deutsche Messe AG

    "Connected Supply Chain Solutions" is the keynote theme of the CeMAT 2018 from 23 to 27 April in Hannover. The motto represents the interplay between Logistics 4.0 and Industry 4.0 as well as the digital integration and networking of value-adding and supply chains.   more...

  • 619 exhibitors from 21 nations in four show days - with these numbers the CeMAT ASIA closed in November 2017. The logistics event took place at Shanghai's SNIEC exhibition center and announces also record numbers in the visitor participation.

    CeMAT ASIA with strong performance

    CeMAT ASIA with strong performance
    © Deutsche Messe AG

    619 exhibitors from 21 nations in four show days - with these numbers the CeMAT ASIA closed in November 2017. The logistics event took place at Shanghai's SNIEC exhibition center and announces also record numbers in the visitor participation.   more...

  • The trade fair BUS2BUS which focuses on all aspects of modern buses will take place a week earlier than previously scheduled. Thus, as a result of a survey among exhibitors and visitors, the next edition will be held from 19 to 21 March 2019 in Berlin.

    Berlin hosts forthcoming BUS2BUS in March 2019

    BUS2BUS allows a ride on the newest busses.
    © Messe Berlin GmbH

    The trade fair BUS2BUS which focuses on all aspects of modern buses will take place a week earlier than previously scheduled. Thus, as a result of a survey among exhibitors and visitors, the next edition will be held from 19 to 21 March 2019 in Berlin.   more...

  • Next year's Motorradwelt Bodensee, the international motorcycle exhibition, will take place from 26 to 28 January 2018 in Friedrichshafen - and be bigger than ever before. The event kicks into high gear with expanded customizing and travel sections.

    Motorradwelt Bodensee is going to break all records

    Stunning motorbikes are competing to catch the visitors' attention.
    © Messe Friedrichshafen

    Next year's Motorradwelt Bodensee, the international motorcycle exhibition, will take place from 26 to 28 January 2018 in Friedrichshafen - and be bigger than ever before. The event kicks into high gear with expanded customizing and travel sections.   more...

  • The Canadian International AutoShow is sponsoring an online competition for modified cars called Tuner Battlegrounds: AutoShow Edition, in which the winner will be crowned at the annual AutoShow in Toronto (16 to 25 February 2018) and awarded a 5,000 dollars cash prize.

    Canadian International AutoShow will award a cash prize

    Toronto hosts the Canadian International AutoShow which focuses on the future of mobility.
    © Miroslaw / pixelio.de

    The Canadian International AutoShow is sponsoring an online competition for modified cars called Tuner Battlegrounds: AutoShow Edition, in which the winner will be crowned at the annual AutoShow in Toronto (16 to 25 February 2018) and awarded a 5,000 dollars cash prize.   more...

  • From 15 to 17 May 2018, Innorobo 2018, Europe's leading robotics event, will once again bring together all types of industrial and service robotics, and will unveil the technologies driving the intelligence of tomorrow's robots.

    Innorobo scales up and moves to Porte de Versailles

    Innorobo is a hub that brings together all of the players in the robotics ecosystem
    © Pierre Metivier/flickr CC BY-NC 20

    From 15 to 17 May 2018, Innorobo 2018, Europe's leading robotics event, will once again bring together all types of industrial and service robotics, and will unveil the technologies driving the intelligence of tomorrow's robots.   more...

  • After four-action packed days, the annual leading industrial events in Asia-Pacific region, CeMAT ASIA, Cold Chain ASIA, Heavy Machinery ASIA, APEX ASIA, PTC ASIA, ComVac ASIA and Industrial Supply ASIA 2017 came to a successful close on November 3, 2017.

    CeMAT ASIA: A Global Hub for smart manufacturing

    During CeMAT Asia, experts and scholars discussed the wide implementation of Industrie 4.0 in different industries
    © Deutsche Messe AG

    After four-action packed days, the annual leading industrial events in Asia-Pacific region, CeMAT ASIA, Cold Chain ASIA, Heavy Machinery ASIA, APEX ASIA, PTC ASIA, ComVac ASIA and Industrial Supply ASIA 2017 came to a successful close on November 3, 2017.   more...

  • In 2020 the seven existing EuroShop dimensions (Shop Fitting & Store Design, Visual Merchandising, Lighting, Retail Marketing, Retail Technology, Refrigeration & Energy Management and Expo & Event Marketing) will have another one added to them. This 8th dimension at EuroShop will be called Food Service Equipment.

    Food service equipment at EuroShop 2020

    EuroShop will take place on 16-20 February 2020 in Düsseldorf.
    © Messe Düsseldorf/ctillmann

    In 2020 the seven existing EuroShop dimensions (Shop Fitting & Store Design, Visual Merchandising, Lighting, Retail Marketing, Retail Technology, Refrigeration & Energy Management and Expo & Event Marketing) will have another one added to them. This 8th dimension at EuroShop will be called Food Service Equipment.   more...

  • The debut of the combined trade fairs pacprocess Tehran, as part of the interpack alliance, and IPAP Printing & Packaging Expo - powered by drupa, has markedly exceeded both exhibitors' and visitors' expectations and also prompted satisfied faces among the organisers Messe Düsseldorf and Barsaz Rooydad Pars Company (BRP).

    Numerous deals at pacprocess Tehran and IPAP

    Some 7,500 experts were attracted by the trade fair duo pacprocess Tehran and IPAP.
    © BRP

    The debut of the combined trade fairs pacprocess Tehran, as part of the interpack alliance, and IPAP Printing & Packaging Expo - powered by drupa, has markedly exceeded both exhibitors' and visitors' expectations and also prompted satisfied faces among the organisers Messe Düsseldorf and Barsaz Rooydad Pars Company (BRP).   more...

  • With some 10,000 visitors, the combination of several trade fairs - the interpack alliance events pacprocess India, IndiaPack and FoodPex India and the parallel trade fair drink technology India, held by Messe München - can look back to a much acclaimed première in New Delhi.

    Successful première of Indian trade fair quartet

    Drink technology India, held by Messe Munich, was co-located with pacprocess India, IndiaPack and FoodPex India.
    © Messe München GmbH

    With some 10,000 visitors, the combination of several trade fairs - the interpack alliance events pacprocess India, IndiaPack and FoodPex India and the parallel trade fair drink technology India, held by Messe München - can look back to a much acclaimed première in New Delhi.   more...

  • What does a functioning smart home look like today? What does it offer in terms of security, convenience, cost savings and added value? Answers to these questions can be found at the Smart Home at imm cologne 2018: in the form of a real house that is open for visitors to enter and explore.

    Intelligent home at imm cologne 2018

    imm cologne, the international interiors show, will take place on 15-21 January, 2018.
    © Koelnmesse GmbH

    What does a functioning smart home look like today? What does it offer in terms of security, convenience, cost savings and added value? Answers to these questions can be found at the Smart Home at imm cologne 2018: in the form of a real house that is open for visitors to enter and explore.   more...

  • The 2018 Kitchen & Bath Industry Show (KBIS), the destination for kitchen and bath design professionals, announces the all-new Global Launch Pad, a global pavilion comprising kitchen and bath brands from the United Kingdom and Continental Europe coming to KBIS this January.

    KBIS 2018 introduces new global pavilion

    At the Orange County Convention Center in Orlando, Florida, USA, KBIS 2018 will be held January 9-11, 2018.
    © By Nehrams2020, CC BY-SA 3.0

    The 2018 Kitchen & Bath Industry Show (KBIS), the destination for kitchen and bath design professionals, announces the all-new Global Launch Pad, a global pavilion comprising kitchen and bath brands from the United Kingdom and Continental Europe coming to KBIS this January.   more...

  • At R+T in Stuttgart from 27 February to 3 March 2018, specialist visitors will discover numerous solutions for the all-round protection of buildings. In addition, the framework programme will offer expert know-how at first hand.

    R+T: Be on the safe side with roller shutters and doors

    Anti-lift devices, stable armour plating and reinforced guide rails ensure all-round building security
    © Warema

    At R+T in Stuttgart from 27 February to 3 March 2018, specialist visitors will discover numerous solutions for the all-round protection of buildings. In addition, the framework programme will offer expert know-how at first hand.   more...

  • The most important annual international event of the year for concrete and masonry professionals, World of Concrete (WOC 2018), expects to attract 60,000 professional registrants and 1,500 leading suppliers from around the world.

    WOC 2018: Largest event in nine years expected

    The Masonry Skills Challenge at WOC attracts lots of visitors
    © Informa Exhibitions/World of Concrete

    The most important annual international event of the year for concrete and masonry professionals, World of Concrete (WOC 2018), expects to attract 60,000 professional registrants and 1,500 leading suppliers from around the world.   more...

  • A new generation of robots is on the verge of making the breakthrough in the food and beverage industry: the cobots. Equipped with collaborating arms, sensitive sensors and cutting-edge safety technology, the autonomous lightweight robots will work hand in hand with the employees in future.

    Anuga FoodTec 2018: Robots in the food industry

    Anuga FoodTec will inform the visitors about what opportunities interaction between humans and machines will bring the production and logistics.
    © Koelnmesse GmbH / Jürgen Dehniger

    A new generation of robots is on the verge of making the breakthrough in the food and beverage industry: the cobots. Equipped with collaborating arms, sensitive sensors and cutting-edge safety technology, the autonomous lightweight robots will work hand in hand with the employees in future.   more...

  • Less artificial ingredients, less sugar and fat, instead more natural tastes, colours and consistencies for sweets and snacks - ProSweets Cologne, the international supplier fair for the sweets and snacks industry will also be taking a look at the industry's future in 2018.

    Ingredients for sweets & snacks at ProSweets Cologne

    ProSweets Cologne will take place on 28-31 January, 2018 - over 300 companies from the sections manufacturing, packing and ingredients are expected.
    © Koelnmesse GmbH / Harald Fleissner

    Less artificial ingredients, less sugar and fat, instead more natural tastes, colours and consistencies for sweets and snacks - ProSweets Cologne, the international supplier fair for the sweets and snacks industry will also be taking a look at the industry's future in 2018.   more...

  • The up-and-coming "craft" theme which is in high demand among ProWein visitors is catered to by the re-designed special show "same but different". To the tune of 50 exhibitors will exhibit their products such as craft spirits, craft beers and cider.

    ProWein 2018 with special show "same but different"

    In 2018, the special show "same but different" will move to Hall 7.0.
    © Messe Düsseldorf / ctillmann

    The up-and-coming "craft" theme which is in high demand among ProWein visitors is catered to by the re-designed special show "same but different". To the tune of 50 exhibitors will exhibit their products such as craft spirits, craft beers and cider.   more...

  • At present, nine UFI events are confirmed for 2018 including the 85th UFI Global Congress in St. Petersburg, Russia (31 October - 3 November 2018). To serve the fast-growing number of members in Latin America, the 1st Latin America Regional Conference is being prepared for September in Mexico City.

    Nine UFI events confirmed for 2018 - New leadership

    In St. Petersburg, Russia, the 85th UFI Global Congress will take place on 31 October–3 November, 2018.
    © Rolf Handke / pixelio.de

    At present, nine UFI events are confirmed for 2018 including the 85th UFI Global Congress in St. Petersburg, Russia (31 October - 3 November 2018). To serve the fast-growing number of members in Latin America, the 1st Latin America Regional Conference is being prepared for September in Mexico City.   more...

  • Core data from UFI's World Map of Exhibition Venues shows growth of global venue space: As the total amount of exhibition space available around the world continues to grow, exhibition organisers have a more and more diverse choice of venues available in their target markets.

    1,221 exhibition venues serve the industry around the world

    Core data from UFI's World Map of Exhibition Venues shows growth of global venue space.
    © UFI

    Core data from UFI's World Map of Exhibition Venues shows growth of global venue space: As the total amount of exhibition space available around the world continues to grow, exhibition organisers have a more and more diverse choice of venues available in their target markets.   more...

  • For its "outstanding" customer service, Messe Essen has received the "Best Service Quality 2017/18" mark of distinction jointly awarded by a magazine and the Statista statistics portal and has occupied third place in the Trade Fair Organiser category.

    Messe Essen receives seal for best service quality

    Messe Essen has received the "Best Service Quality 2017/18" mark.
    © Messe Essen / Rainer Schimm

    For its "outstanding" customer service, Messe Essen has received the "Best Service Quality 2017/18" mark of distinction jointly awarded by a magazine and the Statista statistics portal and has occupied third place in the Trade Fair Organiser category.   more...

  • Cordelia von Gymnich (56) has taken over at the helm of Messe Frankfurt's Services division effective 1 October 2017. In this capacity, she succeeds Dr. Andreas Winckler, who was appointed to the Extended Board of Management of Messe Frankfurt as Chief of Information Technology.

    New Head of Services at Messe Frankfurt

    Cordelia von Gymnich (56) has taken over at the helm of Messe Frankfurt's Services division
    © Messe Frankfurt

    Cordelia von Gymnich (56) has taken over at the helm of Messe Frankfurt's Services division effective 1 October 2017. In this capacity, she succeeds Dr. Andreas Winckler, who was appointed to the Extended Board of Management of Messe Frankfurt as Chief of Information Technology.   more...

  • The 2018 edition of Mobile World Congress will take place in Barcelona from 26 February to 1 March 2018 at Fira Gran Via. The GSMA has an agreement in place with the Barcelona City Partners making Barcelona the host city of the GSMA Mobile World Congress through 2023.

    Barcelona hosts Mobile World Congress through 2023

    Barcelona remains the mobile world capital.
    © Kristina Bösenberg / pixelio.de

    The 2018 edition of Mobile World Congress will take place in Barcelona from 26 February to 1 March 2018 at Fira Gran Via. The GSMA has an agreement in place with the Barcelona City Partners making Barcelona the host city of the GSMA Mobile World Congress through 2023.   more...

  • For the first time, Data Centre World will be housed in its own hall at ExCeL London, to meet the growing demands of the data centre industry. The event will take place from 21 to 22 March 2018 and is meant for everyone involved in running and building data centres.

    Data Centre World 2018 will be hosted in its own hall

    Data centre managers get inspired at London's Data Centre World.
    © Sebastian von Thadden / pixelio.de

    For the first time, Data Centre World will be housed in its own hall at ExCeL London, to meet the growing demands of the data centre industry. The event will take place from 21 to 22 March 2018 and is meant for everyone involved in running and building data centres.   more...

  • The healthcare sector is experiencing rapid change. Medica - to take place in Düsseldorf from 13 to 16 November 2017 - will be embracing this dynamic with the presentation of new products by more than 5,000 exhibitors from 68 countries.

    Premiere of Medica Academy

    Premiere of MEDICA ACADEMY
    © Messe Düsseldorf / ctillmann

    The healthcare sector is experiencing rapid change. Medica - to take place in Düsseldorf from 13 to 16 November 2017 - will be embracing this dynamic with the presentation of new products by more than 5,000 exhibitors from 68 countries.   more...

  • The MT-CONNECT 2018, to be held in Nuremberg on 11 to 12 April 2018 in conjunction with the international congress MedTech Summit - Congress and Partnering, will once again strive to appeal to all manufacturer and supplier fields in medical technology.

    "IT security" a major topic at MT-CONNECT 2018

    “IT security” a major topic at MT-CONNECT 2018
    © NuernbergMesse / Thomas Geiger

    The MT-CONNECT 2018, to be held in Nuremberg on 11 to 12 April 2018 in conjunction with the international congress MedTech Summit - Congress and Partnering, will once again strive to appeal to all manufacturer and supplier fields in medical technology.   more...

  • Mobility and home care were top topics at the Rehacare International 2017 in Düsseldorf, where about 39,000 visitors gained information on the specialist trade fair and conference on support and knowledge on independent living.

    Rehacare 2017: Independent living in focus

    REHACARE 2017: Independent living in focus
    © Messe Düsseldorf / ctillmann

    Mobility and home care were top topics at the Rehacare International 2017 in Düsseldorf, where about 39,000 visitors gained information on the specialist trade fair and conference on support and knowledge on independent living.   more...

  • The dates for the third edition of Moulding Expo, the International Trade Fair for Tool, Pattern and Mould Making, have now been decided. The most important representatives of the industry will again be present at the Stuttgart Trade Fair Centre on 21 to 24 May 2019.

    Dates for Moulding Expo 2019 have been fixed

    The next Moulding Expo will take place on 21 to 24 May 2019 at the Stuttgart Trade Fair Centre.
    © Messe Stuttgart

    The dates for the third edition of Moulding Expo, the International Trade Fair for Tool, Pattern and Mould Making, have now been decided. The most important representatives of the industry will again be present at the Stuttgart Trade Fair Centre on 21 to 24 May 2019.   more...

  • When LABVOLUTION ended in May of this year, smartLAB was moved just a few hundred meters to the Deutsche Messe Technology Academy, where it stands now - fully assembled and fully operational - in Pavilion 36 at the Hannover Exhibition Center.

    Permanent smartLAB in Hannover

    Permanent smartLAB in Hannover
    © Deutsche Messe AG

    When LABVOLUTION ended in May of this year, smartLAB was moved just a few hundred meters to the Deutsche Messe Technology Academy, where it stands now - fully assembled and fully operational - in Pavilion 36 at the Hannover Exhibition Center.   more...

  • Engineers, scientists, and technology suppliers will meet from 27 January through 1 February in San Francisco, California at SPIE Photonics West 2018. About 20,000 visitors expected to attend major exhibitions, tech talks on the latest light-based advances.

    SPIE Photonics West 2018: Light innovations

    SPIE Photonics West 2018: Light innovations
    © SuRom / pixelio.de

    Engineers, scientists, and technology suppliers will meet from 27 January through 1 February in San Francisco, California at SPIE Photonics West 2018. About 20,000 visitors expected to attend major exhibitions, tech talks on the latest light-based advances.   more...

  • The Embedded Vision Europe (EVE), a brand new conference in Stuttgart, got very positive feedback from participants and exhibitors. It was held on 12 and 13 October 2017 at the ICS International Congress Center Stuttgart in Germany.

    Embedded Vision Europe with strong start

    Embedded Vision Europe with strong start
    © EMVA

    The Embedded Vision Europe (EVE), a brand new conference in Stuttgart, got very positive feedback from participants and exhibitors. It was held on 12 and 13 October 2017 at the ICS International Congress Center Stuttgart in Germany.   more...

  • The world's leading trade show for industrial technology is spreading its wings. In September of 2018, Deutsche Messe is staging its first-ever HANNOVER MESSE in the USA.

    First-ever HANNOVER MESSE USA in September 2018

    Chicago is an international hub for finance, commerce, industry, technology, telecommunications, and transportation
    © jan37k/pixelio.de

    The world's leading trade show for industrial technology is spreading its wings. In September of 2018, Deutsche Messe is staging its first-ever HANNOVER MESSE in the USA.   more...

  • E-mobility is an essential cornerstone of the energy transition. When fueled by electricity from renewable sources, electric vehicles represent the climate-friendly mobility solution of the future.

    Power2Drive: E-mobility meets the energy industry

    Power2Drive Europe offers a comprehensive program that highlights all aspects of e-mobility and charging infrastructure
    © Solar Promotion GmbH

    E-mobility is an essential cornerstone of the energy transition. When fueled by electricity from renewable sources, electric vehicles represent the climate-friendly mobility solution of the future.   more...

  • The 33rd solar research conference EU PVSEC 2017, which took place in Amsterdam from 25 - 29 September 2017, ended with 1,107 presentations and therefore again is the world's largest photovoltaic scientific conference.

    The Solar Revolution is just starting

    At this year’s EU PVSEC conference solar experts from 65 countries made 1,107 presentations
    © flickr/EU PVSEC CC BY-NC-ND 2.0

    The 33rd solar research conference EU PVSEC 2017, which took place in Amsterdam from 25 - 29 September 2017, ended with 1,107 presentations and therefore again is the world's largest photovoltaic scientific conference.   more...

  • EuroCIS 2018 presents its START-UP HUB in Hall 9 of the Düsseldorf Exhibition Centre from 17 February to 1 March. There, start-up companies will show state-of-the-art IT systems and solutions for the retail trade.

    EuroCIS 2018 with new START-UP HUB

    EuroCIS 2018
    © Messe Düsseldorf / ctillmann

    EuroCIS 2018 presents its START-UP HUB in Hall 9 of the Düsseldorf Exhibition Centre from 17 February to 1 March. There, start-up companies will show state-of-the-art IT systems and solutions for the retail trade.   more...